IntelliShift OBD-3035 Guide
The following is an install guide on our OBD-3035
Install Notes
- The OBD-3035 is a pure Plug & Play device. Locate your vehicles OBD Diagnostics port, on most passenger vehicles this is located below the knee panel on the driver side of your interior. Once found, plug the device into the OBD Diagnostics port. Ensure the fit is right and verify that the device now has turned on by looking at the indicator lights on the side. If the device is connected but seems loose, please secure a zip tie around the device and OBD port.
- Status Indicators
- LED #1 (Comm LED - Orange) Definitions
-
-
Condition LED 1 Modem Off Off Comm On - Searching Slow Blinking Network Available Fast Blinking Registered but no Inbound Acknowledgement Alternates from Solid to Fast Blink every 1s Registered and Received Inbound Acknowledgement Solid
-
- LED #2 (GPS LED - Green) Definitions
-
-
Condition LED 2 GPS Off Off GPS On Slow Blinking GPS Time Sync Fast Blinking GPS Fix Received Solid
-
If you have any questions during installation, please contact our Service Department at 631-339-7171 for assistance.
Before finalizing installation, please contact our Hardware Verification Department at 631-670-1623 to have them verify the vehicle is visible in Silent Passenger and is registering properly.
Comments
0 comments
Article is closed for comments.